Good start.I am trying to build a robot using an STM Micro. Looking for pointers.
I have already selected the STM32G474VET6 so the HW design is complete. Problem is don't know how to program the micro, that is where I seek help/ideasGood start.
Choose an STM micro.
Here it is.Show us the hardware and circuit diagram.
Show us the hardware and circuit diagram.
BTW, no MCU hardware design is complete before the software is designed, coded, and debugged.I have already selected the STM32G474VET6 so the HW design is complete. Problem is don't know how to program the micro, that is where I seek help/ideas
Because I needed to see what connections you have provided in the HW in order to program the MCU.I know that! So why did you ask for schematics? Seems you are backing out after all my trouble.
Of course. Are you willing to be humble, grateful and cooperative?So now you've seen, you are bereft of ideas?
If you enjoy playing word games I'm all set.Of course what?
Thanks, will try with the Cube IDE.My first choice of IDE for programming an STM32 MCU would be STM32CubeIDE. It is free.
My first attempt at writing any embedded program would be to make an LED flash.