RF transmission and 7 Segment display

Discussion in 'Embedded Systems and Microcontrollers' started by mallikarjun somu, Jun 9, 2017.

  1. mallikarjun somu

    Thread Starter New Member

    Jun 9, 2017
    Hi guys i am working on an a activity where data ( hour,minutes and seconds) is transmitted through RF transmitter and the received data is displayed using an 8 digit MAX7219 based 7 segment display.
    The problem I'm facing is both transmission part and display part work perfectly separately. But when combined just the data is received but 7 segment is not turned on. Have attached all the codes here.
    Would like to solve this problem as soon as possible.
    Thank you in advance :)