Good morning,
I am still working on the Rf signal generator, and have a inductor theory question. The print shows a tapped coil with a slug. The "Repair " was a 5 turn tapped coil no slug as shown in the pic, I have located a slugged coil that is not tapped. Does this make it operate differently?, or should I buy a second higher value coil and put it in series so it becomes "Tapped" and follows the print??
https://www.ebay.com/itm/17-25-variable-RF-inductor-vintage-ferrite-core-slug-radio-tuning-coil-NOS/302686276594?hash=item4679820bf2:g:q2kAAOSwol5Y2HZB&_sacat=0&_nkw=slug+inductor&_from=R40&rt=nc&LH_TitleDesc=0|0
I am still working on the Rf signal generator, and have a inductor theory question. The print shows a tapped coil with a slug. The "Repair " was a 5 turn tapped coil no slug as shown in the pic, I have located a slugged coil that is not tapped. Does this make it operate differently?, or should I buy a second higher value coil and put it in series so it becomes "Tapped" and follows the print??
https://www.ebay.com/itm/17-25-variable-RF-inductor-vintage-ferrite-core-slug-radio-tuning-coil-NOS/302686276594?hash=item4679820bf2:g:q2kAAOSwol5Y2HZB&_sacat=0&_nkw=slug+inductor&_from=R40&rt=nc&LH_TitleDesc=0|0
Attachments
-
48.5 KB Views: 5