Reversing single phase 3 wire motor

Thread Starter

pork hunt

Joined Oct 27, 2018
2
I have a hoist motor that has had control wires pulled out and need reinstalling. motor only has 3 wires coming out of it which makes it impossible to reverse a winding. Have added attached wiring diagram. Any help would be greatly appreciated. Thanks
 

Attachments

Ylli

Joined Nov 13, 2015
1,088
Red - Yellow you see 5.7 ohms
Red to Green you see 11.4 ohms
Yellow - Green you see 5.7 ohms.

That would make Yellow the common lead. The 8 uF cap goes between the Red and Green wires.
Power is applied between the Yellow and Red for one direction, and Yellow and Green for the other direction.
 

Thread Starter

pork hunt

Joined Oct 27, 2018
2
definately does not match existing wiring in controller. but changed wiring as you described.works perfect.
THANK YOU ,YOUR A LEGEND
 
Top