By appearance I see pads ripped off. Also the bare wire looks like the one on one relationship with the other bare wire on the other side of the bus. I would assume the black goes to the partial pad just above, the bus would need to be bridged with a solder blob and he will need a very small tip on a variable solder Iron. IMHO, If he doesn't have access to a good solder station, it's probably cheaper to buy new head phones.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
G | Pioneer X-HM72 (and X-HM82) power supply repair | Technical Repair | 1 | |
K | Mobility Scooter Power Supply Repair (2) | Power Electronics | 3 | |
A | Small mixer repair help. | General Electronics Chat | 9 | |
T | Milwaukee M12-18FC Charger Repair | Technical Repair | 1 | |
C | Repair pcb from a ventilator | Technical Repair | 13 |