Hi, I lost my printer cable and i need to replace it.
on the printer, near the plug hole it's written 100-240V~ 60/50Hz 350mA. From what I know, that should be the INPUT, it should mean that it works at a range of 100-240V, so basically anywhere, at 60/50hertz and require 350mA to work.
I found a cable, on the cable i see written 300/300V but on the cable plug it's written 2.5A, 250V~.
from my knowledge, but i might be wrong, the cord could have higher A than the plug, the plug just won't use more than necessary, but the tension must be the same, and in this case 250V is bigger than 100-240V.
If i'm correct, i can't use this cord or i'll burn the device. Am i correct? how to chose the right one? I tried using it but didn't work, does it mean i burned my printer?
Thank you
on the printer, near the plug hole it's written 100-240V~ 60/50Hz 350mA. From what I know, that should be the INPUT, it should mean that it works at a range of 100-240V, so basically anywhere, at 60/50hertz and require 350mA to work.
I found a cable, on the cable i see written 300/300V but on the cable plug it's written 2.5A, 250V~.
from my knowledge, but i might be wrong, the cord could have higher A than the plug, the plug just won't use more than necessary, but the tension must be the same, and in this case 250V is bigger than 100-240V.
If i'm correct, i can't use this cord or i'll burn the device. Am i correct? how to chose the right one? I tried using it but didn't work, does it mean i burned my printer?
Thank you