Many thanks, Jony130. Attached is screen shot of what I have done. The only question is, should enter the entire model on the "All properties" box?
What should I do with existing properties i.e BV=3.3 while the model specifies BV=30?
I also noticed that Eg=85. I have read that activation energy for silicon is 1.11 Si. Is this 0.85?
Appreciate.
What should I do with existing properties i.e BV=3.3 while the model specifies BV=30?
I also noticed that Eg=85. I have read that activation energy for silicon is 1.11 Si. Is this 0.85?
Appreciate.
Attachments
-
95.2 KB Views: 18
Last edited: