Hello,
I want to ask about the switch on the logic pulser. it is swithcable between 0.5pps and 400pps. What does (pps) stand for?

While searching on the internet. I found that two falues make the logic pulser suitable to be used with either a logic probe or an oscilliscope. Which value make it suitable with probe and which with oscilliscope?

I want some hints on how to use the pulser.

THANKS..

 

PPS = pulses per second. The lower setting is suitable for a logic probe. Use the pulser as an input - do recall that other logic elements may have to be enabled by having their inputs tied high or low.