Facebook
Google
GitHub
Linkedin
Question about JFET switching circuit
- Thread starter chenron7
- Start date
Im tring to analyze a circuit and it has this switching circuit that I dont really understand (especially the diodes part ).
It seems that the JFET is ON when the gate is left floating via D1 (D1 prevents the JFET gate to channel diode to conduct) and a positive voltage at the FS2 point. And when FS2 is at ground the JFES is OFF.
I suspect that the 10μF capacitor was add to slow down Turn ON and Turn-OFF time used to prevent "pop sound" when switching between ON/OFF.
And it is a mystery to me why they add into the circuit the D2+100k resistor in parallel with the 1k resistor.
I suspect that the 10μF capacitor was add to slow down Turn ON and Turn-OFF time used to prevent "pop sound" when switching between ON/OFF.
And it is a mystery to me why they add into the circuit the D2+100k resistor in parallel with the 1k resistor.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| J | Isolation Transformer Question for Signal Tracing with Oscilloscope | General Electronics Chat | 23 | |
| M | Question on condenser microphones circuitery | General Electronics Chat | 11 | |
| C | ceiling fan control question | General Electronics Chat | 25 | |
| Y | differential line loss question | Wireless & RF Design | 2 | |
|
JFET switch question | Homework Help | 16 |
