Question about design of difference amplifier

Thread Starter

William.A.

Joined Dec 12, 2020
8
Hello guys I am working on a simulation lab to design a difference amplifier to realize the transfer function = −10(V1) + 0.5(V2). (Hint: R1 = 10 kΩ and R3 = 100 kΩ) . By the general equation, I got the value of R4=4.762kΩ and R2=100kΩ.

Then I set the input V1 as a sinusoidal signal with a 2v peak to peak voltage and V2 is positive 15v.
I think the output is weird because it shows a result around 14.06vwhich doesn't satisfy the transfer function.
why the output isn't in the range of -2.5v to 17.5v?
Is there any wrong or misunderstanding in my calculation and design?
WeChat 圖片_20211021235816.pngWeChat 圖片_20211021235822.png
 

Thread Starter

William.A.

Joined Dec 12, 2020
8
Now the problem is solved. I just drew the whole circuit again and this time it showed the result I expected. Thank you guys.
 
Top