please help me. i need the solution.
Q5. Using mesh analysis and nodal analysis both to find all the parameter.
- Thread starter anirban121
- Start date
Before beginning a nodal analysis it helps to prepare the node diagram. Select a ground node. Color-code & label the active nodes. Begin every term in the node equation with the voltage of that node (if possible).
{Don't know anything about mesh. I never touch the stuff.}
{Don't know anything about mesh. I never touch the stuff.}
Attachments
What do you mean by 'parameters', is that the node voltages and branch currents?
What do you know about nodal and mesh analysis already?
