Pspice Simulation Problem : The part/device cannot be simulated

Thread Starter

feiz94

Joined Apr 12, 2016
1
Hello,
I tried to simulate a schematic on Pspice. But when I run the simulation (transient), I got some Errors saying that : The part/device cannot be simulated..
I got a green circle on the OP27. I tried to change this device with another OPamp 27 from other libraries but it didn't work (Please see the Printscreen)
Any one has an idea to solve this Problem?
Thank you in advance.
 

Attachments

Are You sure that the Pspice model of the OP27 is ok ?
Try this check:
Select the OP27 , then right click with the mouse on the OP27 , then select "edit Pspice model"
Do You get the right pspice model for the op-amp ?
 
Top