Hi, I'm new to this site, I have a pioneer djm 500 and the issue is that it seems to be something wrong with the input levels, sound like the amp volume is low and the channels and trim are turn past the half way marks, and the level peaks are low unless I turn the bass knob up on the djm and that's on all 4 channels. The peak level don't respond at all on the master channel with little increase in sound. I thought it was my music source and/or amp, so I switch the djm out with a Mackie 1202-vlz and it sound great like the djm did before the issues I'm having now. Could someone please give me some direction on this matter? I'm no expert, intermediate at best.I have a cheap digital multimeter TEK 10709 if that means anything. Any help would be greatly appreciated.
Problem with pioneer djm 500
- Thread starter deapayne
- Start date
Service manual here...diagrams start on page 4...
https://www.manualslib.com/manual/701333/Pioneer-Djm-500.html
Start by inputting on one good channel and follow it through
and compare it with a faulty channel..ideally you need a Scope, or a small amplifier to pick up the signal, or put you meter on AC millivolts/Volts. ..
https://www.manualslib.com/manual/701333/Pioneer-Djm-500.html
Start by inputting on one good channel and follow it through
and compare it with a faulty channel..ideally you need a Scope, or a small amplifier to pick up the signal, or put you meter on AC millivolts/Volts. ..
