Hi all, The treadmill trips on power up. I disconnected the motor ( positive and negative only) and found it switched on digital display and could operate the incline motor. Replaced the motor with spare and issue not resolved. Checked the controller board next. It's a MC2100ELS-18W-2y. Found LED light on and blinks every 38 seconds approx. Put multi meter on card output to motor and found voltage drops from 250 - 115 vdc. It's like it resets at 38 seconds and goes back up to 250vdc. Has anyone seen this issue before and could advise how to resolve.
Thanks for reading.
Thanks for reading.