Hello. Complete electronics newbie here.
i bought a Led driver off Aliexpress.
input: AC100-240V
Output: DC30-57v / 600mA (constant)
i connected it to a led strip, they flashed several times then switched off (i suspect they died).
i then took the multimeter and measured the Output voltage, and it was around 74V.
i suspect this is what killed the leds.
My question is: am I missing something ? This power supply is supposed to output max 57V. Why does it show 74?
is the power supply faulty? Or did I measure it wrong?
i bought a Led driver off Aliexpress.
input: AC100-240V
Output: DC30-57v / 600mA (constant)
i connected it to a led strip, they flashed several times then switched off (i suspect they died).
i then took the multimeter and measured the Output voltage, and it was around 74V.
i suspect this is what killed the leds.
My question is: am I missing something ? This power supply is supposed to output max 57V. Why does it show 74?
is the power supply faulty? Or did I measure it wrong?
Attachments
-
2.4 MB Views: 12