Hello ACC Forum,
Looking for a circuit to build a
Power supply 110 volts AC to 24 volts DC 1.5 - 2 amps
Have found lots of posts on 3v, 5, volt and especially 12 volt
https://www.homemade-circuits.com/how-to-design-power-supply-simplest-to/
https://www.caretxdigital.com/
https://www.build-electronic-circuits.com/power-supply-circuit/
https://www.electronicsteacher.com/...r-supplies-and-control-schematics/ckt19_1.gif
Have seen several designs for 12 volt 6, 8 and 10 amp circuits.
Need to build a circuit to power a controller for
an LED COB strip
https://www.amazon.com/dp/B09W5J763J?smid=A2A6WV1Z7O325J&ref_=chk_typ_imgToDp&th=1
The wall wart that comes with the strip is 1.5 amps
and will supply plenty of juice for a 16 foot COB strip.
I would like to replace the wall wart with a small
PCB.
Any ideas?
Thanks.
Allen Pitts
Looking for a circuit to build a
Power supply 110 volts AC to 24 volts DC 1.5 - 2 amps
Have found lots of posts on 3v, 5, volt and especially 12 volt
https://www.homemade-circuits.com/how-to-design-power-supply-simplest-to/
https://www.caretxdigital.com/
https://www.build-electronic-circuits.com/power-supply-circuit/
https://www.electronicsteacher.com/...r-supplies-and-control-schematics/ckt19_1.gif
Have seen several designs for 12 volt 6, 8 and 10 amp circuits.
Need to build a circuit to power a controller for
an LED COB strip
https://www.amazon.com/dp/B09W5J763J?smid=A2A6WV1Z7O325J&ref_=chk_typ_imgToDp&th=1
The wall wart that comes with the strip is 1.5 amps
and will supply plenty of juice for a 16 foot COB strip.
I would like to replace the wall wart with a small
PCB.
Any ideas?
Thanks.
Allen Pitts


