Power noise(Low noise) measurement

Thread Starter

serdes_ogog

Joined Oct 27, 2022
1
Dear all,

I have a low noise LDO which needs to be measured for the noise in the frequency domain. The frequency range is from 10Hz to 10MHz. The noise floor after 100KHz is 1nV/sqrHz. E5052B could be a good solution. However, I am wondering to know is there have other options.

Thank!
 

ronsimpson

Joined Oct 7, 2019
3,149
When you choose a Signal Source Analyzer, make certain it covers the frequency range. There are SSA for low frequency and different ones for high frequency.
 
Top