Portable USB charger for 5V and max of 1A

Thread Starter

Mike2526

Joined Nov 10, 2020
110
Dear all,

Hope this message finds you in good health and full of energy. I am interested in designing a 5V USB charger capable of delivering a maximum current of 1A, although my requirement is around 500mA. Additionally, this charger should have the ability of battery backup. For this purpose, I have chosen the BQ24259 IC to complete my project. However, if there are any other good options or circuits available, I would be grateful if you could share them with me. I am eagerly awaiting your prompt and kind response.

Thank you in advance.
 

Ya’akov

Joined Jan 27, 2019
10,367
No Boss, I want design for my own self.
First, I am not your “boss”, please don‘t call me that.

Second, this project is an odd one to do “just for yourself” considering the large number of available products—both complete and in module form—that do this and more. Because the reasoning behind building such an anemic supply is unclear, it would help a lot for you to provide some documentation on requirements and current circuit ideas you are working with.

Without this information there is little reason to suggest any particular devices or approach, or an alternative to what you have already chosen.

Requirements are best given by describing the problem you expect the device to solve, that is, how will it look to use it as you intend. Schematics, BoM (Bill of Materials), mechanical drawings, and any other documentation you can add will further increase the chances you will get good advice from people who actually know.

Good luck with your project.
 

Thread Starter

Mike2526

Joined Nov 10, 2020
110
Good luck with your project.

Thank you for your response and guidance. I appreciate your insights, and I understand that there are readily available products in the market for similar applications. However, I have a personal interest in building this USB charger with battery backup as a means of enhancing my hands-on skills and personal growth. I believe the practical experience gained from such a project will contribute significantly to my learning.

Regarding your suggestion on available modules and documentation, I've been searching but haven't found a suitable reference yet. Could you kindly refer me to an authentic source or share any specific module that aligns with my exact requirements? To provide more clarity, I am looking for a lithium polymer battery charger with a path selection feature, capable of handling an input voltage of AC 220V, and providing an output of 5V with a maximum current of 1A.

Your assistance in this matter is highly valued, and I look forward to your continued guidance.

Thank you once again.
 

dl324

Joined Mar 30, 2015
18,521
I understand that there are readily available products in the market for similar applications. However, I have a personal interest in building this USB charger with battery backup as a means of enhancing my hands-on skills and personal growth. I believe the practical experience gained from such a project will contribute significantly to my learning.
Buy a power bank and tear it apart to see how they did it.

If you want to do it yourself, get a Li-ion battery, charging chip, and the relevant connectors.

This reminds me that I wanted to use a power bank as a UPS for a Raspberry Pi...
 

Thread Starter

Mike2526

Joined Nov 10, 2020
110
If you want to do it yourself, get a Li-ion battery, charging chip, and the relevant connectors.

Thanks for your kind reply. Can you suggest me which chip is best suitable option from the following ?

BQ 24075, BQ24259, MCP73831, and LT3652
 

Ya’akov

Joined Jan 27, 2019
10,367
There are a couple of options that I know of. One is designed, and includes holders for 18650 cells, and provides three voltages (5V, 3.3V, and 1.8V) from a boost-buck converter. The other is designed for a single LiPo (though it should work fine with a single 18650), and comes in a few versions.


All support charge-while-discharging making them effectively line-interactive UPSs. All include boost or buck-boost converters. The output capacities are all 1A, but I am suspicious about this for the 9V/12V board and checking the datasheet for the converter IC might reveal it could provide more current with some cooling (e.g.: a heatsink).

​
 
Top