Plasma TV No sound or image and clicking noise

Thread Starter

tliky

Joined Nov 25, 2012
1
Hello all,

I have the Samsung Plasma and as the title mentioned, it has no sound nor image. Based on what I have found, it should power module's problem, but I could not find any blown fuse or cap. Any suggestion on what I should do?





Thanks!
 

kubeek

Joined Sep 20, 2005
5,796
Look which caps look bulged on the PSU module and replace them. If you don´t see any then you need an ESR meter, or if you have a shop close by change them all.
 

sheldons

Joined Oct 26, 2011
613
before going too deeply,disconnect the leads to the y sus and z sus panels and see if yr set powers up......chances are you may have a failed sustain panel in which case replacement panel and driver may cure your set......
 
Top