Hello,I need to bias a chip from the opposite part of the chip.
How the pin order of the chip changes with respect the top layer when i put the chip on the opposite layer?
Thanks.
https://www.minicircuits.com/pdfs/PMA5-83-2W+.pdf

 

Look at the back of the page.
The bottom view is the mirror image of the top view.
So instead of pin 1 being on the top left (in top picture) it would be on the top right from the bottom, and the pin order is clockwise instead of counter-clockwise.

(Why does the bottom layout picture not show the pins in order?)