Hi i'm making a circuit for couting an display EADOG with SPI protocol.
I made the SPI configuration but when i try to send a bit, i dont see any signal output from the SDO and the CLK doesn't start. I dont really now the problem, it could be in configurations bits or SPI function/setup or in the PPS because i have the SDO in RC4 and the CLK in RC5.
I made the SPI configuration but when i try to send a bit, i dont see any signal output from the SDO and the CLK doesn't start. I dont really now the problem, it could be in configurations bits or SPI function/setup or in the PPS because i have the SDO in RC4 and the CLK in RC5.
Attachments
-
125.9 KB Views: 3
-
3.8 KB Views: 3
-
1.8 KB Views: 4
-
1.6 KB Views: 3
-
928 bytes Views: 3
-
1.7 KB Views: 1