Phase converter + Electronic AC load

Thread Starter

jean_jean

Joined Apr 2, 2016
10
Dear all,

I would like to know what would be the best way to convert in the lab 220V to 380V (i thought of a transformer with 1 winding in the primary and 3 in the secondary) and what affordable AC loads can I use.

Best regards,
Jean
 

tcmtech

Joined Nov 4, 2013
2,867
What loads do you have and do they need 380 VAC in single or three phase power?

If you have no loads that need 380 VAC in single or three phase then you have no need or a converter to power them.
 

Thread Starter

jean_jean

Joined Apr 2, 2016
10
What loads do you have and do they need 380 VAC in single or three phase power?

If you have no loads that need 380 VAC in single or three phase then you have no need or a converter to power them.
Hi, I would like to put an AC load on each phase and simulate different load behaviors (resistive, inductive, capacitive) + i have a 380v pump that I would like to connect - for teaching purposes.
 
Top