phase 90 power surge

Status
Not open for further replies.

Thread Starter

kgrs

Joined Nov 5, 2011
2
I accidently connected my phase 90 using a walwart that I thought was a 120v ac to 9v dc (didn"t have my glasses on ) turns out the walwart was 120v ac to 9v ac. The led came on, then went dim and then off. Now the led doesn't work nor does the effect, only the by-pass (I bought batteries to check, something I should have done first) How much damage was done and is it fixable?
 
Status
Not open for further replies.
Top