All About Circuits

pcie to pci-x forward bridge interrupts

Search Forums New Posts
Anurag7

Thread Starter

Anurag7

Joined Sep 11, 2016
1
hi ,
i am using a forward bridge to convert pci -E protocol to pci -x .. And using tat to extend my pci slots... I have pulled up all the pci interrupts to 3.3V using a 8.2K ohm resistors.. Now I am facing the cards which is being used on the pci slots are not able to fire interrupts.. But the card is working fine on a desktop PC.. This bridging is giving me troubles.. Please help
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
Trumpeldor Industrial PCIe Gen3 (NVMe) to USB 3.2 Bridge – Part or Architecture Recommendation Digital Design 1
N RS232 Communication - PCIe card or USB to RS232 converter General Electronics Chat 10
hrs RPI 5 PCIe fpc <---> M.2 NVMe SSD Microcontrollers 1
E PCIe Gen3/Gen4 Eye opening requirements PCB Layout , EDA & Simulations 0
A PCIE extension CABEL General Electronics Chat 0
Similar threads
Industrial PCIe Gen3 (NVMe) to USB 3.2 Bridge – Part or Architecture Recommendation
RS232 Communication - PCIe card or USB to RS232 converter
RPI 5 PCIe fpc <---> M.2 NVMe SSD
PCIe Gen3/Gen4 Eye opening requirements
PCIE extension CABEL

You May Also Like

Top