Wops, forgot to post the figures.i cant see the fig 1 and 2.
are they posted or is there a specific page u are talking about.
R1 and (R3 + C) are in parallel with each other, and R2 is in series with the resulting association. It is important to not forget about the capacitors, unless the circuit is under an AC regime under a almost infinite frequency.I have 2 circuits where the resistors are parallel connected but if you look at the circuit (Fig 2) it´s getting all blurry too me.
Fig 1:
R1 // R2
Fig 2:
In my opinion this should be
R1//R2//R3 but the answer is
(R1//R2) + R3 (How can this be so?)
Yes, that seems confusing to me, how come?Were you to replace C in Fig 2 with a short, then you would have:
(R1||R3) + R2.
it wud be r1//r2//r3 only if the other terminals of r1 and r2 were connected.
remember fro being in parallel the components must be connected across same two points.
by Jake Hertz
by Jake Hertz
by Duane Benson
by Jake Hertz