Parallel port interfacing of a dc motor using adc0804

Thread Starter

masab_ahmad

Joined Dec 16, 2010
1
Hi!

i am using a dc motor as a generator which will provide input to the adc0804 which further will be connected to the parallel port to be read by the computer. So I wanted to ask by what procedure should i use the adc0804 like what should i do with the adc pins except the data output pins...I intend to use the following circuit(attached)..with LED's at the data output pins and a motor working as a generator at Vin(+).
 

Attachments

Top