Hello
I am on my way to control eight servoes with a Arduino mega 2560. However these servos are rather large, and the voltage regulators I have for them (regular buck converter) are only capable of supplying the amps for two servos each. In other words, there are four regulators, each connected to two servos each. The supply is a lipo battery.
I want to control all the servos via pwm directly on the board. Will connecting all these as is, be safe, or could it be that the regulators could be damaged by reverse voltage from another regulator that might have a higher voltage etc.?
(Sorry if I have posted this in the wrong part of the forum)
I am on my way to control eight servoes with a Arduino mega 2560. However these servos are rather large, and the voltage regulators I have for them (regular buck converter) are only capable of supplying the amps for two servos each. In other words, there are four regulators, each connected to two servos each. The supply is a lipo battery.
I want to control all the servos via pwm directly on the board. Will connecting all these as is, be safe, or could it be that the regulators could be damaged by reverse voltage from another regulator that might have a higher voltage etc.?
(Sorry if I have posted this in the wrong part of the forum)