oscillator simulation

Thread Starter

kahafeez

Joined Dec 2, 2008
150
hi i need to simulate a 200KHz sine wave oscillator.... a wein bridge one.... which software do i need to simulate it???? i've tried a few bt they dont work.... i've tried Proteus, Multisim, EWB...
 
Last edited:

SgtWookie

Joined Jul 17, 2007
22,230
In the Circuitmaker version "osc.ckt", you did not have power supplied to the opamp.

The +V gets connected to the top pin, the -v to the bottom pin.
I suggest +10v and -10v.
 

Audioguru

Joined Dec 20, 2007
11,248
May I ask, what improvement do the extra parts in fig. 4 provide?
They gently clamp the max output swing of the opamp so that its output does not slam into the power supply rails and produce a badly clipped sine-wave like the first circuit does.
 
Top