All About Circuits

Option Globeserfer III - Access status info.

Search Forums New Posts
D

Thread Starter

Dyslexicbloke

Joined Sep 4, 2010
566
Hi folks,
I just installed an Option Globeserfer III which is a seriously good bit of kit.
http://www.option.com/en/products/products/wireless-routers/globesurfer3/

It comes with a little monitoring app that sits in the system tray and displays signal strength and other bits and peces, not essential but nice and usefull none the less.

The problem is that the software is only capable of looking at the default IP address, which I'm not using .....

I have looked for INI files and Reg keys to see if it can be adjusted but cant find anything and the tech support havnt answered my question.

Anyone know how I can access the status info from within a VB app?

(There is a telnet interface but I cant find a command that returns what I need.)
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A Which LGA or breakout option is best for testing a SIM868 module? General Electronics Chat 1
T Cost effective stack-up option for a 8 layer PCB with no vias or circuits on the bottom side. PCB Layout , EDA & Simulations 0
Ya’akov 26650 Cells—If you need them, here’s a good option. General Electronics Chat 0
cawensel Search for a LED option to work with 5v and under 4mA General Electronics Chat 9
B relay preferred option Analog & Mixed-Signal Design 2
Similar threads
Which LGA or breakout option is best for testing a SIM868 module?
Cost effective stack-up option for a 8 layer PCB with no vias or circuits on the bottom side.
26650 Cells—If you need them, here’s a good option.
Search for a LED option to work with 5v and under 4mA
relay preferred option

You May Also Like

Top