Still working with the TI Op Amp Handbook and was given this.
If I interpreted this correctly, using Eo- as a reference GND and inputting Ei=1Vpp, I should see 4Vpp on Channel 4 @ Eo+? So I breadboarded it using TL071CPs with Ei=1Vpp @ 200Hz.
And I'm getting 1Vpp, not 4Vpp on channel 4...
What did I miss?
If I interpreted this correctly, using Eo- as a reference GND and inputting Ei=1Vpp, I should see 4Vpp on Channel 4 @ Eo+? So I breadboarded it using TL071CPs with Ei=1Vpp @ 200Hz.
And I'm getting 1Vpp, not 4Vpp on channel 4...
What did I miss?