Hello all! I am working with a simple half wave rectifier circuit for audio purposes that uses only one capacitor and one germanium diode. My goal is to have the ability to output either phase of a waveform and also combine two halves of waveforms to create a new wave. I get results of either a positive or negative half Of a cycle but do not see how to split the output for an either/or result not can I send signal the opposite direction without blowing diodes. Parts to use:
3x 10k resistor
2x 100k resistor
2x diodes
3x 3.5mm female jacks
There is a piece of gear I am basing this on, but was hoping to modify once I get the proper circuit.
Thank you for your time and consideration!
3x 10k resistor
2x 100k resistor
2x diodes
3x 3.5mm female jacks
There is a piece of gear I am basing this on, but was hoping to modify once I get the proper circuit.
Thank you for your time and consideration!