Need a project enclosure 6"x2.7"x1.3"

Thread Starter

cvangordon

Joined Mar 28, 2016
31
i can't seem to find a project enclosure seller that has anything that works. It really needs to have those dimensions because its going to be hand held so it needs to not be too wide or skinny, needs to be 5.5-6in long to fit the parts and 1.1-1.5 inches tall to keep it low profile.
 

philba

Joined Aug 17, 2017
959
This is one of the reasons I bought a 3D printer.

When sticking with premade cases, you need to select the case BEFORE anything else. Finding a case after you've done all the fun stuff makes a project a lot less fun. Some case makers even give you board dimensions and hole patterns.
 
Top