Mixed Signal Simulation Problem

Discussion in 'The Projects Forum' started by Nomi 1114, Apr 17, 2019.

Thread Status:
Not open for further replies.
  1. Nomi 1114

    Thread Starter New Member

    Dec 4, 2017
    16
    0
    Dear All,

    Hope you all are doing well with good health. Here i would like t ask for one favor that i am going to design RF Transmitter at frequency of 8.2 MHz, which will be used for RFID application (i.e Electronic Article Surveillance system). For designing purpose i used Altium Designer 16.0 , schematic is ready but we are also interested to simulate this circuit in Altium Designer. For mixed signal simulation we used this software. But during simulation i am facing some problems, that's why i asked for favor from all of you. The main problem is some SPICE model files are missing or not available in libraries. i try to find but unfortunately didn't succeed. so what can i do in this situation ... i am much worried about this, and i have required to finish this task as early as possible. I have found .ibis Models but those are use less, for mixed signal simulation purpose SPICE is mandatory, kindly suggest me how can i do mixed signal simulation ......

    Anxiously waiting for your kind and quick response...

    With Humble Regards
     
  2. WBahn

    Moderator

    Mar 31, 2012
    24,560
    7,700
    MOD NOTE: Please -- one thread per topic.
     
    Nomi 1114 likes this.
Loading...
Thread Status:
Not open for further replies.