Hi guys,
decided to ask. maybe someone came across this, but I did not find how to identify a damaged element.
In general, I need an element identification.
since many manufacturers of SMD components it is very difficult to identify them without special expensive equipment.
The circuit schematic is not available.
From the available one there is an oscilloscope of 1 GHz. (From a calibration signal) And there is a signal of a reference oscillator of 10 MHz.
I was able to find one whole, and made measurements of dimensions and resistance.
dimensions:
L=2.04 W=1.31 H=0.87mm
electrical parameters:
R=70mΩ
What this element ?
L-? C-?
any ideas, Damaged item in the photo.
thanks.
decided to ask. maybe someone came across this, but I did not find how to identify a damaged element.
In general, I need an element identification.
since many manufacturers of SMD components it is very difficult to identify them without special expensive equipment.
The circuit schematic is not available.
From the available one there is an oscilloscope of 1 GHz. (From a calibration signal) And there is a signal of a reference oscillator of 10 MHz.
I was able to find one whole, and made measurements of dimensions and resistance.
dimensions:
L=2.04 W=1.31 H=0.87mm
electrical parameters:
R=70mΩ
What this element ?
L-? C-?
any ideas, Damaged item in the photo.
thanks.
Attachments
-
553.6 KB Views: 24