I purchased a couple of 100VAC, 600RPM heavy duty drills a while ago, and I'd like to see if it's possible to make them run faster. The motors are of the universal brushed-type, with the stator and the rotor connected in series.
Short of changing their gear ratio, is there an electrical trick out there that I could use to make them run faster? Preferably at twice their rated speed. Something tells me there's no practical way of doing that, but I'm asking just to make sure.
@MaxHeadRoom
Short of changing their gear ratio, is there an electrical trick out there that I could use to make them run faster? Preferably at twice their rated speed. Something tells me there's no practical way of doing that, but I'm asking just to make sure.
@MaxHeadRoom