Hello , I have a switch called XM-A351-0604D, it needs a biasing network PCB to operate described in the link and photo below.
I have -Vin and CTL.Where can I find the logic of these inputs so my switch will operate properly?
Thanks.


biasing network:
https://catalog.quanticxmw.com/item/bias-and-control/bias-controllers/xm-a9p1-0604d-sp

 

Hello,

I see that you are interested in microwave design.
Perhaps the following books will be of interest to you:
https://archive.org/details/microwaveandrfdesignvolume1radiosystemsthirdedition
https://archive.org/details/microwaveandrfdesignvolume2transmissionlinesthirdedition
https://archive.org/details/microwaveandrfdesignvolume3networksthirdedition
https://archive.org/details/microwaveandrfdesignvolume4modulesthirdedition
https://archive.org/details/microwaveandrfdesignvolume5amplifiersandoscillatorsthirdedition

There is also a hobby based book from the ham radio club rsgb:
https://archive.org/details/fea_Microwave_Know_How

Bertus