Hello All, this problem is driving me nuts and I've been working a few weeks on it to try and learn how to go about getting it right. I built a small AM radio kit - check, I wrote a 20 page report - check, now I need to run a PSpice simulation to get some input output Gain figures about two IC's in the circuit and plots for AC DC input output. I have built the circuit in pSpice and jumped through the hoops to associate a Model with the NJM386 part schematic. When mapping the pins the part diagram had two pins named Gain so I renamed them, It wouldn't accept it otherwise, to match the model I had gotten on the web. Now it doesn't give an error of not having an associated Model for Pspice simulation and everything is mapped properly. I pull the part into the circuit but now it gives me an error for each of the two pins that I renamed for correct mapping purposes and I still can't run the sim. This is beyond the fact its hitting me with about 8 floating node errors. Anyway, I really hope someone can help me out as it was my last effort to finally ask for help from some expert users.
Here's the Circuit Schematic:
And the errors:
Here's the Circuit Schematic:
And the errors: