Linak control box stuffed

Discussion in 'The Projects Forum' started by Slicer, Nov 2, 2014.

  1. Slicer

    Thread Starter New Member

    Nov 2, 2014
    I have Linak CB14M control box which has gone awry, since I've replaced the transformer I've now got power to the board but nothing working with the foot control.
    I'd like to know if there is a procedure to reset the box after this work?
    Also, could I replace this box with a less complicated, no-memory box and control as I have no real need for memory function.
    Any help would be gratefully received.