I am getting some Battery packs, Li-Ion 14.8 Volt. 800mAh
They are supplied with over voltage charging protection, Short Circuit Protection and Under voltage.
The battery manufacture suggests that it is charged at 200mA.
I have attached a drawing of the circuit I want to build to charge the battery, However I am not sure if this will limit the current.
I am going to use a 220 to 24 Volt transformer, rectified and then the voltage adjusted to the 14.8 volts. I need to confirm the suggested charging voltage.
How do I make sure the current is limited to charge at no more than the 200mA.
They are supplied with over voltage charging protection, Short Circuit Protection and Under voltage.
The battery manufacture suggests that it is charged at 200mA.
I have attached a drawing of the circuit I want to build to charge the battery, However I am not sure if this will limit the current.
I am going to use a 220 to 24 Volt transformer, rectified and then the voltage adjusted to the 14.8 volts. I need to confirm the suggested charging voltage.
How do I make sure the current is limited to charge at no more than the 200mA.
Attachments
-
40 KB Views: 56