All About Circuits

LDO Output cap on Analog and Digital ground?

GoExtreme

Thread Starter

GoExtreme

Joined Mar 4, 2018
52
I'm making a amp meter with ina226. Board has analog and digital ground connected with 0 Ohm resistor.
Is it ok to have decoupling cap connected to Digital GND on the LDO output pin? Attached picture of the situation. Not sure if capacitor on OUT should be on Analog ground plane.
 

Attachments

You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
S What is the Purpose of 6.8nF Capacitor connected in Parallel to Analog Output Lines ? General Electronics Chat 3
M looking for an instrument with at least 8 analog to digital output ports Analog & Mixed-Signal Design 7
Mischa Johal How to convert analog output of photodiode into digital intensity chart? Sensor Design & Implementation 9
J Shuffle Logic for analog input and four digital output Analog & Mixed-Signal Design 5
W Analog to digital converter. 8 output bits. 256 or 255 divisions of input voltage? Homework Help 7
Similar threads
What is the Purpose of 6.8nF Capacitor connected in Parallel to Analog Output Lines ?
looking for an instrument with at least 8 analog to digital output ports
How to convert analog output of photodiode into digital intensity chart?
Shuffle Logic for analog input and four digital output
Analog to digital converter. 8 output bits. 256 or 255 divisions of input voltage?

You May Also Like

Top