Marc Sugrue
- Joined Jan 19, 2018
- 222
Hi Prithvi,Hi Marc,
When I use the DC source instead of the rectifiers output the waves are clean from both the current and the voltage.Does this mean the problem is with the rectifier ?
I have not connected any control elements so far, all I was trying is to connect the rectifiers output to inverter and get clean waveform.
You need to look for the source for distortion under rectified AC conditions. To my mind its either your rectified voltage waveform has significant 500hz ripple which is passing through your converter and modulating on top of your 400hz or your reference sine driving the HBridge is corrupted on AC.