KiCad Routing tracks

Thread Starter

christiannielsen

Joined Jun 30, 2019
298
Hi,

I am routing tracks for the first time.

In the screenshot below I would like to route a track to VCC by the mouse pointer cross, but I cant and I dont know why?

I also see air-wires to ground many places but those pins should connect to GND cupper pour. Did I do something wrong?

1598371345500.png
 

jpanhalt

Joined Jan 18, 2008
10,252
I don't use KiCad; however, a quick search on version 5.1 seems to indicate that you cannot hide a specific net, as you can do with Eagle. One idea is to move that net to another layer then change it back when done. Alternatively, you can highlight the ratsnest for the net on which you are currently working.
 

Thread Starter

christiannielsen

Joined Jun 30, 2019
298
I'm sorry I am not sure which problem you are refering to and I dont think I am trying to hide a net?

What I mean by my first question is that I cant route the track I am currently tracking in the screenshot to J3p2. I cannot click it or any other place with power.
 
Top