Hi,
I'm looking to standoff a small PCB off of a larger main board at 90 degrees. What is the best way to do this with off- the shelf parts.
I was envisioning doing so with maybe a double row 90 degree header pins that would also provide the connections. The weight on the small board would not be an issue for something like these pins to support. Is there such a header pin? I was looking through Digikey and Mouser but the selection for headers is nearly infinite and looking for a starting point to look at.
Also, the boards would not have to disconnect meaning I would be ok to solder at both ends rather than one end being a connector.
Thanks
I'm looking to standoff a small PCB off of a larger main board at 90 degrees. What is the best way to do this with off- the shelf parts.
I was envisioning doing so with maybe a double row 90 degree header pins that would also provide the connections. The weight on the small board would not be an issue for something like these pins to support. Is there such a header pin? I was looking through Digikey and Mouser but the selection for headers is nearly infinite and looking for a starting point to look at.
Also, the boards would not have to disconnect meaning I would be ok to solder at both ends rather than one end being a connector.
Thanks