I recently bought some Jfets (2N5565).
They are yet to arrive
I am hoping they will be good enough to do the job.
The circuit attached is the oscillator of a minimoog synthesizer.
In this schematic they show an E402.
An equivalents chart suggested an LS3954 or LS841.
In another article it was suggested that the 2N5565 could also be used.
I'm about to find out.
I believe the crucial thing is to match Vgs (cutoff voltage).
Could either of these be used in that circuit?
I have attached the data sheets of the LS841 and 2N5565.
Caveat: i'm a hobbiest not an EE.
Any thoughts.
They are yet to arrive
I am hoping they will be good enough to do the job.
The circuit attached is the oscillator of a minimoog synthesizer.
In this schematic they show an E402.
An equivalents chart suggested an LS3954 or LS841.
In another article it was suggested that the 2N5565 could also be used.
I'm about to find out.
I believe the crucial thing is to match Vgs (cutoff voltage).
Could either of these be used in that circuit?
I have attached the data sheets of the LS841 and 2N5565.
Caveat: i'm a hobbiest not an EE.
Any thoughts.
Attachments
-
33.6 KB Views: 10
-
49.2 KB Views: 9
-
86.7 KB Views: 20
Last edited: