Is there a module to detect if battery of drone died and as the drone is falling of the sky auto deploy parachute .
so is their a device i can make ? to detect battery level of charge or maybe detect if drone has stopped and falling.

i seen parachute u can buy on ebay.

this will prevent the drone from getting damaged.

 

Here it is http://bfy.tw/C78l

 

Thought we covered this earlier today. Drones are smart including a smart battery. The drone's GPS knows where home is and where it is and how much battery remains with a good margin. The drone calculates RTH (Return to Home) time and needed energy, allows a good safety margin and returns to home. Smart drone and smart battery. Works fine and should last a long time. Don't screw with it. You started a battery monitoring thread this morning, what was that all about?

Ron

 

battery monitoring thread , i wanted to learn how to make one from scratch as i am learning just give me the shot and teach me.
i wanted to test the battery status monitoring pcb to se how much bars it has left

 

Me sensing troll. My post specifically answers his question, yet barely two posts later, he repeats his question. This pattern appears in his other posts as well.

 

This is the condign punishment for feeding the trolls

 

battery monitoring thread , i wanted to learn how to make one from scratch as i am learning just give me the shot and teach me.
i wanted to test the battery status monitoring pcb to se how much bars it has left

And has any thought been placed into the suggestions you were given? There are entire forums dedicated to drones, the members exchange ideas related to drones and everything that is drone. You really do not seem interested in how to do things or in most cases not do things and why. Just question after question. Maybe a drone related forum would be of some interest?

This is the condign punishment for feeding the trolls

Likely!

Ron

 

A Rob...
So far you have just come here and basically demanded people just give you a shopping list and a simplistic version and have basically shown that you are not willing to do any real work and just want it all handed to you..
That is NOT going to "fly" (pun intended) around here..
We are more than willing to help but only to those that show they will do their fair share of the work too.

I'd hope that you have not intended to do that but you have or that's what we see from you...


I would suggest that like learning anything in life that you start with the basics and work your way up.
What I've seen so far is that you do not have the knowledge to even begin to comprehend the instructions one would provide on how to construct a battery monitoring circuit.
You have not shown that you even know what to do with a schematic if we were to just hand it to you..
Do you have any soldering skills?
Do you even own a soldering iron?
Have you ever breadboarded a circuit before?
Have you even designed and fabricated a circuit board?


None of us knew how to build circuits when we were young/first started.. But guess what we all have done.. We took the time to learn and to educate ourselves so that we could have fun experimenting/building,etc.. electronic/electronic devices..

This site has a wealth of educational material already available to you though..
Please start here and learn the basics first..
At the very least you should complete Volume 1 and Volume 3 of the textbook information.
https://www.allaboutcircuits.com/textbook/

There is more here..
https://www.allaboutcircuits.com/education/

 

Do you have any soldering skills?
Do you even own a soldering iron?
Have you ever breadboarded a circuit before?
Have you even designed and fabricated a circuit board?

yes sir i can do all that.

i can understand all you and please do not get upset guys am just a normal person like you and asking for help , some of you was in my position at one time to.

its like asking what is 1+1 = i say 2 u say 1 then i ask how is it 1 , so thats maybe what is happening and please do not let questions get to u , after all am trying to learn from basic also thanks.

 

Do you have any soldering skills?
Do you even own a soldering iron?
Have you ever breadboarded a circuit before?
Have you even designed and fabricated a circuit board?

yes sir i can do all that.

i can understand all you and please do not get upset guys am just a normal person like you and asking for help , some of you was in my position at one time to.


its like asking what is 1+1 = i say 2 u say 1 then i ask how is it 1 , so thats maybe what is happening and please do not let questions get to u , after all am trying to learn from basic also thanks.

This isn't a cutesy texting site, so your use of conventional English spelling, punctuation, and grammar would, I'm sure, be greatly appreciated.
For your perusal:
https://docs.google.com/viewer?a=v&...xicmVhdG9uc2V3YzR1fGd4OjQ1MmU3OWFiNzAzZTk2M2M