Apologies, very newbie question - How can I make a circuit with an 'Industry Standard 1/4 Brick'? I'm assuming these types of components usually get soldered into a PCB but is there something off-the-shelf I can buy and hand solder this into myself?
This is the component in question - https://www.xppower.com/portals/0/pdfs/SF_QSC150.pdf
It's for 12V conversion project I'm attempting for two network devices I want to mount inside an enclosure with all circuitry conversion circuitry.
This is the component in question - https://www.xppower.com/portals/0/pdfs/SF_QSC150.pdf
It's for 12V conversion project I'm attempting for two network devices I want to mount inside an enclosure with all circuitry conversion circuitry.