the people at Mantech hates me for changing the order the whole time. I decided to build 2 seperate models a 12V 100uH and a 36V 150uH using 680uF/63V for C2 on both models. I have 63V package of the 100uF for both models. R1 and R2 remains the same R1 1K 2W and R2 0.1W but I'm probably gonna use 47k Min Lin Pot @ 0.125W instead of the trimmer I currently have, any comments welcome
I misplaced calculations, could somebody please show me how to calculate power through each resistor R1 1K and VR2 47K
I misplaced calculations, could somebody please show me how to calculate power through each resistor R1 1K and VR2 47K