Attached is a photo of an RS-422/RS-485 communication module. An human error caused the SMD component (circled in RED) shown in the photo to blow up. I have another exactly identical board where I could check the exact code number on the part that requires replacement.
The code is: 712
When I searched online I got the following list: http://www.s-manuals.com/smd/71
I am assuming that this component is acting as a buffer for the signal as it is connecting the IC (MAX3491E) output to the output terminal. Therefore I would say it is an N-Channel MOSFET.
I would really appreciate your verification..
thanks!
The code is: 712
When I searched online I got the following list: http://www.s-manuals.com/smd/71
I am assuming that this component is acting as a buffer for the signal as it is connecting the IC (MAX3491E) output to the output terminal. Therefore I would say it is an N-Channel MOSFET.
I would really appreciate your verification..
thanks!
Attachments
-
460 KB Views: 24