Please find the figure in below. I need to get feedback of current which is flowing through the R10.
Maximum current:- 25 mA (Bi-directional)
Input Common mode voltage can be :- -/+ 25.5 V
There are some current sense amplifiers in Texas Instruments. But the issue is those sensors minimum ratings for the common-mode voltage is -22 V.
I've also attached the datasheet of one current sensor.
Is there any way to overcome this challenge or Is there any component which suits my application?
Maximum current:- 25 mA (Bi-directional)
Input Common mode voltage can be :- -/+ 25.5 V
There are some current sense amplifiers in Texas Instruments. But the issue is those sensors minimum ratings for the common-mode voltage is -22 V.
I've also attached the datasheet of one current sensor.
Is there any way to overcome this challenge or Is there any component which suits my application?
Attachments
-
12.3 KB Views: 9
-
2 MB Views: 6