Could someone tell me how to run a frequency response simulation
using LTS. CE amp simulation file attached.
Thanks
using LTS. CE amp simulation file attached.
Thanks
Attachments
-
2 KB Views: 18
The gain is very small. (-29db) Some thing is not right yet. I can see the gain is large.Something like this.
Thanks Eric. Is there a way to have gain or output voltage on the vertical axis or is thathi,
Something like this.
E
Perfect. Thanks Eric.
Thanks crutschow.LTspice references all AC dB gain values relative to 1V input, so that will give the output gain in dB, or click on the vertical axis to select a different display unit (below).
View attachment 193237
Thanks Ron.Found it. Gain=31db.
VS was set to 1mV. I usually use 1V.
by Duane Benson
by Aaron Carman
by Jake Hertz